Publicidad
Idiomas disponibles
Idiomas disponibles
Confi guration of the hydraulic diagram of the thermostove
BY A SPECIALIZED TECHNICIAN
Before starting the thermostove, it is necessary to confi gure the hydraulic scheme on which we want to work. The
thermostove is set up to receive the clean contact of an external thermostat (open / closed, the thermostat must not give
tension to the back. If the thermostat carries voltage to the board causing faults, the warranty is void), two temperature
probes and a motorized valve . All these components can be connected via the terminal board on the back of the
thermostove.
Electrical diagram of the control unit
1.0
Per il tecnico specializzato:
To confi gure the hydraulic diagram, press the SET key and then
power key. PPress the SET key again to enter the menu and enter the access key in possession of only the technician
power key. PPress the SET key again to enter the menu and enter the access key in possession of only the technician
authorized by the manufacturer. Confi rm the password using the set key and the key
authorized by the manufacturer. Confi rm the password using the set key and the key
authorized by the manufacturer. Confi rm the password using the set key and the key
authorized by the manufacturer. Confi rm the password using the set key and the key
authorized by the manufacturer. Confi rm the password using the set key and the key
authorized by the manufacturer. Confi rm the password using the set key and the key
"hydraulic scheme". Confi rm with the SET key and use the
number.
For end user:
It is possible to change the thermostove operating principle according to the season by choosing between summer and
winter. To select the season press SET, the season selection will appear on the display. Then press the set key again and
select the season with keys 1 and 2. Once selected, press the ON / OFF key to exit.
The choice of season changes the thermostove operation, see next chapter.
56
GENERAL ELECTRICAL
CONNECTION DIAGRAM IDRO BOILERS
PRESSURE
TRANSDUCER
SANITARY
CONNECTION
+12V
H
GND
Cn11
JTAG
SERIALE
AUX IN
Cn24
Cn15
Cn17
Cn9
Cn21
upper puffer
CONSOLLE AND
NTC S2 probe
EXTRA ACCESSORIES
CONVEYED WAVES
lower puffer
NTC S1 probe
boiler
NTC probe
room
NTC probe
ext.
thermostat
-
smoke
TCJ probe
Cn6
Cn19
+
AUX2 AL3
V2/PO
P.B.C N
Cn7
P.B.C.
RESISTANCE
COCHLEA
CLEANER
smoke fan encoder
ELECTRIC
BOARD L023
PE
DISPLAY
FUSE
Cn2
Cn16
Cn4
Cn8
N
AL1
AL2
ACC
COC
SCA
FUMI
N
F
SYSTEM 230Vac
ALM
ALC
ALF
m
*
ROOM FAN
SMOKE FAN
scroll to the "Technical settings" menu with the
and
ELECTRIC
BOARD Q055
P2
P3
P4 F
BAFFLE
(OPTIONAL)
GROUND
HEAT
SANIT.
SIDE
SIDE
3 - WAY
1
COMPACTOR
ALF=general safety thermostat
ALC=pressure switch
ALM=micro switch
* Room fan not provided
There is no room fan
in this thermostove.
of the power go to menu 3
keys to select the required hydraulic scheme
F
N
N
07.04.2017
Publicidad
