Klarstein MAGNICHEF 4 Manual De Instrucciones página 55

Error
The LED display does
not light up when the
appliance is plugged in.
Some buttons do
not work or the LED
display is not correct.
The cooking mode in-
dicator lights up, but
the heating process
does not start.
The heating process
suddenly stops
during operation and
"u" flashes on the
screen.
The heating process
suddenly stops
during operation and
"u" flashes on the
screen.
The fan motor is making
unusual noises.
Problem
No power.
The filter board and
the display board are
defective.
The filter board is
damaged.
The display board is
damaged.
The display board is
defective.
The temperature of
the hob is too high.
An error has occur-
red with the fan.
The filter board is
damaged.
The power board is
damaged.
Wrong pot.
The pot diameter is
too small.
The hob has overheated.
The connection
between the coil and
the power board is
defective.
The pot detection
circuit is damaged.
The fan motor is
damaged.
Solution
Check that the plug
is firmly seated in the
socket and that the
socket is working.
Check the connection.
Replace the filter board.
Replace the display
board.
Replace the display
board.
The ambient tempe-
rature is possibly too
high.
The air inlet or vent
may be blocked.
Check if the fan is
running smoothly, if
not, replace the fan.
Replace the filter board.
Replace the power
board if necessary.
Use the right pot.
Check the informati-
on on suitable pots in
the instruction manual.
Wait until the tem-
perature returns to
normal. Press the
to
power button
restart the device.
Check the connection.
Replace the power
board if necessary.
Replace the fan.
EN
55