Publicidad
Idiomas disponibles
Idiomas disponibles
4.2 Pairing the earbuds with your mobile
device
1. Turn both earbuds On by removing them
from the charging case or pressing the
multifunction button for about 5 seconds. Both
earbuds will automatically pair.
2. Set your Bluetooth
®
"discover" the wireless earbuds.
3. Place the earbuds and your phone not more
than three feet from each other.
4. The LED light in one of the earbuds slowly
blinks in white and the LED light in the other
one turns off. Both are ready to enter pairing
mode.
5. On your mobile phone, tap the newly
discovered audio device KTE-006 being
displayed in the Bluetooth
6. When the mobile device asks if you want to
pair with it, click Yes or OK to accept.
7. If pairing is successful the "connected" prompt
is heard and the earbud LED indicator turns off.
8. If after 60 seconds the pairing process fails,
please repeat steps 1 through 6 as described
above.
9. The earbuds automatically go into standby
mode after a short period of inactivity to save
battery life.
mobile device to
list.
®
10. You only need to pair the earbuds with
your mobile phone once, as they will
reconnect with memorized devices
automatically.
4.3 Using the wireless earbuds
1. Answering and ending a call
• When there is an incoming call, your phone
will ring along with a tone through your
earbuds.
• Press the multifunction button once on any
earbud to pick it up. You may also press the
answer button on your mobile phone to
receive the incoming communication in your
earbuds.
• To end a call, press the multifunction button
once again on any earbud. Likewise, you may
also finish the call directly using the end key on
your smartphone.
• To ignore an incoming call and send the caller
to voicemail, press and hold the multifunction
button on any earbud for about two seconds.
2. Music playback and voice commands
using your earbuds
• Press the multifunction button on either one of
the earbuds to play and stop audio playback.
Publicidad
