KlipXtreme KTE-006 Manual Del Usuario página 3

1. Dust-proof mesh
2. Magnetic charging socket: place each
earbud in the corresponding left and right side of
the charging case for recharging.
3. Charging case LED indicator: the LED
displays the remaining battery level.
4. Charging port: insert the Type C cable in
this port to charge the battery.
5. Built-in microphone: picks up your voice to
enable hands-free calling and conferencing.
Earbuds LED indicator: the LED turns solid
red when charging the earbuds. Once the
earbuds are fully charged the red light turns off.
6. Power/multifunction button: press the
multifunction button to power the earbuds on
and off. In addition, press this button to start and
pause media and to answer or end an incoming
call.
Multifunction button
Mode Function
Pairing If the earbuds are not automatically
in pairing mode, press and hold 5
seconds to enter pairing mode
Hands-free mode Press any button to answer and end
an incoming call. Press and hold for
about 2 seconds to reject or ignore
an incoming call
Playback mode Press the right or left button to play
and pause audio
Volume - Press 3 times the left button
Volume + Press 3 times the right button
Previous track Press twice the left button
Next track Press twice the right button
Voice assistant Hold 1.5 second any button to
activate Siri or Google commands
LED indicators on the charging
case or earbuds
Status Function
Charging The LED displays the power level in
the charging case and blinks
Full charge The LED displays "100" in the
charging case in solid white
Power On Open the charging case and remove
the earbuds from the charging case.
The earbuds will pair automatically. If
not, press and hold 5 seconds to
enter pairing mode
Power Off The LED lights blink in red and then
turn off