Emos P56201 Manual De Instrucciones página 20

Complete the pairing of the thermostat in the mobile app.
See instructions for Connecting the Thermostat to a WiFi Network for Control
via the Mobile App.
Switching Heating/Cooling Mode
Long-press the
Press the button once.
Use the buttons to switch to heating (HEAT) or cooling (COOL) mode.
Confirm with .
Setting the Temperature Differential
The temperature differential (hysteresis) is the difference in temperature required
for switching the system on and off. If, for example, you set the temperature in
the heating system to 20 °C and the differential to 0.2 °C, the thermostat activates
heating as soon as room temperature drops to 19.8 °C and switches heating off
when temperature reaches 20.2 °C.
Long-press the
Press the button 2× and use the
differential value (0.2 °C to 2 °C in 0.1 °C increments).
Confirm with .
Ambient Temperature Calibration (CAL)
The temperature sensor in the thermostat is calibrated from production, but
additional calibration can be done to optimise the thermostat further, for instance
by comparing the measured room temperature with a reference thermometer.
Long-press the
Press the button 3× and use the
(-3 °C to +3 °C in 0.5 °C increments).
Confirm with .
Time Synchronisation (SYNC)
Long-press the
Press the button 4× and use the
ON – time will be automatically synchronised with the Wi-Fi network;
OFF – time will not be synchronised with the Wi-Fi network and the time you
set manually will be used.
Confirm with .
Software Version
Long-press the
Press the button 5×; the software version of the thermostat will be displayed.
Return by pressing
Resetting the Thermostat (rESE)
Long-press the
Press the button 6×; rESE will appear on the screen.
Press the PRG button; -- -- will be displayed.
Press the PRG button again; the thermostat's menu will be reset and all set
values will be deleted.
button for about 5 seconds.
button for about 5 seconds.
button for about 5 seconds.
button for about 5 seconds.
button for about 5 seconds.
.
button for about 5 seconds.
buttons to set the temperature
buttons to set the calibration value
buttons to set:
20