Casselin CPSTCF25 Manual De Instrucciones página 29

SERIAL NUMBER
SERIAL NUMBER LABEL
The serial number is made up of a gray serigraphed adhesive label, applied to the back of the machine.
The following data is indicated legibly and indelibly on the label:
- Name of the manufacturer;
- Electrical power (kW/A);
- Model ;
- Mention "Made in Italy";
GENERAL INFORMATIONS
IMPORTANCE OF THE MANUAL
Before using the mixer in question, it is mandatory to read and understand this manual in its entirety.
This manual must always be available for the "authorized operators" and be close to the well guarded and preserved
mixer.
The manufacturer declines all responsibility for any damage to people, animals or property caused by failure to comply
with the rules described in this manual.
This manual is an integral part of the kneader and must be kept until its final disposal.
"Authorized operators" must only carry out work on the mixer that falls within their particular competence.
GUARANTEE
The warranty period is one year and begins from the date of receipt of the invoice issued at the time of purchase.
During this period, will be replaced or repaired free of charge, and only at our factory, those parts w hich, for well-
established and unequivocal reasons, prove to be defective for manufacturing reasons, with the exception of electrical
components and those subject to 'wear.
The warranty excludes shipping and labor costs.
The warranty is not valid in the event that it is established that the damage was caused by: transport, inadequate or
insufficient maintenance, malpractice of the operators, tampering, repairs carried out by unauthorized personnel, non-
compliance with the requirements of the manual.
Any recourse against the manufacturer for direct or indirect damage resulting over the time during which the machine
remains inactive for cause is excluded.
TAMPERING AND/OR REPLACING PARTS WITH NON-ORIGINAL SPARE PARTS WILL VOID THE
WARRANTY, AND RELEASES THE MANUFACTURER FROM ALL LIABILITY.
NOISE INFORMATION
The A-weighted sound pressure level measured on an identical machine sample was consistently below 80
dB(A).
If the working environment has a noise level higher than 80 dB (A), the employer is required to inform and train the
operator on the risks associated with exposure to noise and to take the appropriate measures in agreement with the
occupational physician.
- Serial No ;
- Electrical voltage and frequency (Volt/Hz);
- Year of construction
- Mixer weight
2