Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
B
Important Information
B1
B1-1—Tidy cables and loose items from the
ground and move any unstable, fragile,
precious, or dangerous items to prevent
personal injury or property damage due
to items becoming tangled in, struck by,
or knocked over by the robot.
B1-2—When using the robot in a raised area,
always use a secure physical barrier to
prevent accidental falls that may result in
personal injury or property damage.
Note: When using the robot for the first time, follow it
throughout its whole cleaning route and watch for potential
problems. The robot will be able to clean by itself in future uses.
Position the charging dock
B2
B2-1—Take the screwdriver from its storage
bin at the bottom of the base.
B2-2—Place dock upside down on a soft, flat
surface (carpet/towel/ cloth) and attach
the base by using the six screws provided.
Note: Hold the dustbin cover securely when upside down to
prevent damage from falling.
B2-3—Connect the power cable to the dock,
and keep excess cable inside the storage slot.
B2-4—Place the dock on a hard and flat
floor (wood/tile/concrete etc.). Keep at
least 0.5 m (1.6 ft) of clearance on either
side, 1.5 m (4.9 ft) in front, and 1 m (3.3 ft)
above. Check the location has good WiFi
then turn on.
B2-4-1 More than 0.5m (1.6ft)
B2-4-2 More than 1.5m (4.9ft)
B2-4-3 More than 1m (3.3ft)
Power on and charge the robot
B3
Press and hold the
button to power on
the robot. When the power light goes on,
place it on the dock to charge. To maintain
the performance of the high-performance
lithium-ion rechargeable battery pack, keep
the robot charged.
Note: The robot may not turn on when the battery is low. In
this case, place the robot directly onto the dock to charge.
Connect to the App
This robot supports both Roborock and
Mi Home apps. Choose the one that best
meets your needs.
❶ Download app
Option 1: Search for "Roborock" in the App
Store or Google Play or scan the QR code
to download and install the app.
08
Option 2: Search for "Mi Home" in the App
Store or Google Play or scan the QR code
to download and install the app.
❷ Reset WiFi
Press and hold the
and
buttons until
you hear the "Resetting WiFi" voice alert. The
reset is complete when the WiFi indicator
light flashes blue slowly. The robot will then
wait for a connection.
Note: If you cannot connect to the robot due to your router
configuration, a forgotten password, or any other reason,
reset the WiFi and add your robot as a new device.
❸ Add device
Open the Roborock App, tap the "Search for
device" button, or open Mi Home app, tap "+"
in the top right corner and add the device as
instructed in the app.
Notes:
• The actual process may vary due to ongoing app updates.
Follow the instructions provided in the app.
• Only 2.4 GHz WiFi is supported.
Publicidad
