Publicidad
Idiomas disponibles
Idiomas disponibles
Failure Display and Inspection
If an abnormality comes up, the induction hob will enter the protective state automatically
and display corresponding protective codes:
Problem
F5/F9
Temperature sensor failure
F3/F4
Temperature sensor of IGBT failure
E1/E2
Abnormal supply voltage
E3/E4
Abnormal temperature
E5/E6
Bad induction hob heat radiation
EO/FD/FC
Communication failure
TECHNICAL SPECIFICATIONS
PLACA DE INDUÇÃO
Cooking zones
Supply Voltage
Frequency
Rated power
Product size (HxWxD)
Building-in Dimencions (HxWxD)
Possible causes
What to do
Please contact the service centre
Please contact the service centre
Please inspect whether power supply is normal.
Power on after the power supply is normal.
Please contact the service centre
Please restart after the induction hob cools down.
Make sure the cooktop is connected to the power
supply and that it is switched on. Check whether there
is a power outage in your home or area. If you've
checked everything and the problem persists, call a
qualified technician.
JPIC007476
58 x 700 x 520 mm
560 x 490 mm
59
4
220-240 V
50-60Hz
7200W
Publicidad
