Airflow must be unobstructed. Keep controls, burner and circulation air passageways clean. Signs of
●
possible blockage include:
Gas odor with extreme yellow tipping of flame / Appliance glow is excessively uneven / Appliance
●
makes popping noises.
Spiders and insects can nest in burner or orifices. This dangerous condition can damage the appliance
●
and render it unsafe for use. Clean burner holes by using a heavy duty pipe cleaner. Compressed air
may help clear away smaller particles.
Carbon deposits may create a fire hazard. If any carbon deposits develop, clean dome and engine with
●
arm soapy water.
After the burner and lava rocks are completely cooled down, remove it from the bowl and use a soft
●
brush to get rid of the mild stains, loose dirt and soil. Wipe with a soft cloth.
Clean the bowl and afterward put lava rocks again in proper position.
●
For proper cleaning, a vacuum cleaner can be used.
●
Note: In a salt-air environment (such as near the sea), corrosion occurs more quickly than nor-
mal. Frequently check the corroded areas and repair them promptly. Stubborn stains, dis color-
ation and possibly rust pitting can occur from exposure to harsh outdoor conditions. Be careful
not let any powder or solvent come in contact with painted or plastic components as damage
may occur.
After long use, some dis coloration can come up and it screen is normal.
Make sure both gas supplies are in OFF position before changing battery. Please refer to the process of
assembling battery.
Please contact the Manufacturer or dealer for information regarding replacement hoses, thermocouples,
igniters, lava rocks, etc.
Attention: Never use unauthorized parts or component for this appliance.
Use only original equipment replacement spare parts and components.
Otherwise may void the warranty of this product and result in a hazardous condition.
STORAGE (after use)
Turn control knob in "OFF" position (full disk).
Turn LPG cylinder in "OFF" position.
Store the appliance in a cool dry place away from direct sunlight; store it upright in an area sheltered from
direct contact with inclement weather (such as rain, sleet, hail, snow, dust and debris).
If desired, cover to protect exterior surfaces and to prevent build up in air passages.
Note: Wait until appliance is cool before covering.
During periods of extended inactivity or when transporting:
Turn control knob in "OFF" position (full disk).
Disconnect LPG cylinder and move to a secure, well ventilated location outdoors. store in a location that
will exceed 50°C.
28