5 Operation
20
5
Operation
NOTE! Tips wear out and can bend resulting in a performance loss
and risk of breakage. Use only ultrasonic tips that are not worn or
bent. Do not reshape bent tips.
CAUTION! A loose ultrasonic tip can come loose from the thread
or break off. This may cause injury! Use the ultrasonic handpiece
only if the ultrasonic tip is firmly clamped in place.
CAUTION! Insufficient cooling leads to overheating of the
preparation site, the tip, and the handpiece. Ensure that the water
flow rate is > 30 m l/min.
CAUTION! You can puncture your hand with an ultrasonic
handpiece when the tip is inserted. This may cause injury! When
the ultrasonic handpiece is not in use, remove the tip or attach the
torque wrench for protection.
Operating Instructions BACS125 / BACS126
63 83 066 D3275.201.08.03.02