SOMFY ilmo 40 WT Instructions página 31

2. 4. 2. Restoring the original configuration
2. 4. 2. 1. Using the control point connected to the roller shutter
Follow each of the 4 steps in the procedure carefully to correctly restore the original configuration.
Place the roller shutter in the mid-height position.
1)
Repeat the next step 3 times in succession:
2)
Press the Up button until the roller shutter moves.
-
Release the button immediately.
Repeat the next step twice in succession:
3)
Press the Down button until the roller shutter moves.
-
Release the button immediately.
Press the Down button again until the roller shutter
4)
makes 2 successive movements in the same direction.
The motorisation is reset to the original configuration.
-
2. 4. 2. 2. Using the wired electronic motor setting tool
Press the Up and Down buttons on the setting tool at the
-
same time until the roller shutter makes two successive up
and down movements.
The drive has been restored with the original configuration.
-
3. Use anD maInTenanCe
This drive is maintenance-free
3. 1. raIsIng anD loWerIng THe roller sHUTTer
Press the "Up" button:
1)
The roller shutter rises and stops at the top stop without
-
requiring adjustment.
Press the "Down" button:
2)
The roller shutter descends and stops at the bottom stop
-
without requiring adjustment.
3. 2. obsTaCle DeTeCTIon
The automatic obstacle detection function protects the roller
shutter and enables obstacles to be cleared:
If the roller shutter meets an obstacle when lowered, it
-
stops automatically:
Press the Up button to release the roller shutter.
-
If the roller shutter meets an obstacle when raised, it stops
-
automatically:
Press the Down button to release the roller shutter.
-
3. 3. anTI-freeze ProTeCTIon
The anti-freeze protection function operates in the same way as the obstacle detection function:
If the drive detects any resistance, it does not move in order to protect the roller shutter:
-
The roller shutter remains in the initial position.
-
Copyright © 2009- 2014 Somfy SAS. All rights reserved.
5061937C003_ilmo_40_WT.indb 29
1
3
x 2
7s
1
Images not contractually binding
EN
2
x 3
4
2
29
24/10/2014 10:22