SOMFY ilmo 40 WT Instructions página 32

EN
4. TIPs anD reCommenDaTIons for Use
questions concerning the ilmo 40 WT?
Problems
The roller shutter is not
operational.
5. TeCHnICal DaTa
Power supply
Operating temperature
Index protection rating
Electrical insulation
Somfy hereby declares that the drive covered by these instructions when marked for input voltage 230V
used as intended according to these instructions, is in compliance with the essential requirements of the Machinery
Directive 2006/42/EC and the EMC Directive 2004/108/EC.
An EC declaration of conformity detailing standards and specifications used and stating all particulars for identification of the
drive, name and address of the person(s) authorised to compile the technical file and empowered to draw up the declaration
including place and date of issue can be found at the Internet address www.somfy.com/ce.
30
Images not contractually binding
5061937C003_ilmo_40_WT.indb 30
Possible causes
The drive is hot.
230 V 50 Hz
- 20°C to + 60°C
IP 44
Category II
Copyright © 2009- 2014 Somfy SAS. All rights reserved.
solutions
Wait for the motor to cool down.
50Hz when
24/10/2014 10:22