Publicidad
Idiomas disponibles
Idiomas disponibles
Status Indicator
EN
The following table lists possible causes and solutions in terms of different light status. For more support,
please refer to the section "FAQ" in this manual.
Light Status
No power supply
Off
The robot in the DND period
The robot with full charge in sleep mode
White
The robot not on the base
Breathing White
The robot is charging
Blinking Orange
Error
20
Possible Cause
Check and ensure that the power supply for the base is normal.
/
/
/
Check whether a dust collection bag is installed. If not, install one.
Check whether the dust collection bag is installed in place.
Check whether the upper cover is closed. If not, close the upper cover tightly.
Check whether the bag is full. If so, replace it.
Remove debris around the dust intake of the robot and base.
Unplug the power cord of base, and check whether there are any foreign objects
that block the air duct cover. If any, clean them.
Check whether the dust bin of robot is installed.
For other errors, contact qualified technicians or after-sales service.
Solution
Publicidad
