Publicidad
Idiomas disponibles
Idiomas disponibles
Preparation Before Use
EN
1. Remove the protective strips
2. Install the side brush
Click
Note: Install the side brush until it clicks into place.
10
3. Connect to a power outlet and start charging
Place the base on level ground against the wall and connect it to a power
outlet. Place the robot onto the base to charge. The robot will turn on
automatically and begin charging. It is recommended to fully charge your
robot before first-time use.
Within the Good
Wi-Fi Range
> 0.5 m
> 1.5 m
Note:
• Keep the immediate area 1.5 m in front of the base and 0.5 m to its both sides
clear of objects.
• Make sure that no objects might block the signaling area.
About the Auto-Empty Base
It is recommended that the robot set out from the base before cleaning. Do not
move the base while the robot is cleaning. This ensures that the robot returns to
base smoothly.
After the robot completes the cleaning task and automatically returns to the
base, the base will start auto-empty. More settings can be operated on the APP.
> 0.3 m
> 0.5 m
Put away the power cord
into the cord storage slot
Publicidad
