Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE YOUR PRODUCT
1.
START AND STOP THE PRODUCT
After plug into the socket, a "Beep" will emit and all the indicators flash
once, indicating the appliance in connection with a power source. At
this moment the indicator of [On\Off] will keep flashing. Place a
suitable cookware on the center of the cooking zone. When [On/Off]
key is pressed a time, the appliance goes to selection mode and the
indicator above [On/Off] remains light up, display shows [ON]. Press
the corresponding function keys to start operation. Stop the operation
and switch off the unit by pressing [On/Off] key once after cooking.
2. USING THE
Power Function:
Press the [Power] key once and the indicator of Power will light up,
display will show [1200] representing that the default power level is
there are 10 levels for left burner, including 200W, 400W, 600W,
800W, 1000W, 1200W, 1400W, 1600W, 1800W, 2000W., and 7 levels
for right burner,including
200W,400W,600W,800W,1000W,1200W,1500W. To cancel this
mode, press other function key or [On/Off] key to stop the operation.
Temp Function (same for both burners):
Press the [Temp.] key and the indicator of Temp will light up, display
will show [ 160°] representing that the default temperature is 160℃.
User can press [+] and [-] to set the desired temperature levels, there
are 10 levels in total, including 60℃, 80℃, 100℃, 120℃, 140℃, 160℃,
180℃, 200℃, 220℃, 240℃. To cancel this mode, press other function
key or [On/Off] key to stop the operation.
Timer Function:
User can set the cooking time when the unit is working. Press the
[Timer] key once to access the timer function. The indicator above the
[Timer] key will light up. Display will flash and show [0:00]. The time
can be adjusted from 1 minute to 3 hours. User can press [+] and [-] to
set the desired time, if hold [+] or [-] key, the time can change quickly
by 10 minutes. After setting, user can press [Timer] key once to
confirm or wait until the display stop flashing. After the "Beep" signal,
the appliance will stop the operation and change to standby mode
automatically when the end of the countdown. To cancel this function,
user can either press the [On/Off] key to return to selection mode or
hold the [Timer] key to resume the desired power or temperature
operation.
FUNCTIONS
EN-10
Publicidad
