the rear and at the tip of the device: they must be kept clean without elements likely to
obstruct them.
• Power supply
Check that the power supply and the cord are in perfect condition (must not be pinched or
crushed, no bare wires). Clean with a cloth dampened with water (without any additives).
• Mobile head and application surface
The external part (especially the anti-UV yellow protection filter) can be cleaned with a
dry cloth or with a clean and dry cotton swab.
Never immerse your
device or one of its components in water.
8.2
Changing the replaceable mobile head
is equipped with a replaceable mobile head containing a lamp that issues
5000 flashes.
The intensity of the flash is defined by adjusting the power level of the device. There is no
loss of energy in the life of a replaceable mobile head. When there are only 500 flashes,
then 250 flashes, then 100 flashes successively left on the mobile head, the red indicator
light will warn you (see Chapter 9, "Solving problems").
When the 5000 flashes of the replaceable mobile head have been issued, the red
indicator light that indicates that the mobile head needs to be replaced will turn on: this
has been 100% used. This light warns you that no other flash will be issued. To continue
with your hair removal process, you should replace the replaceable mobile head.
63