Ditel JR-D Manual Tecnico página 71

rSt
nO yES
MAH
nO yES
Once the instrument programming is completed, if there are parameters that are going to be frequently changed, a
partial lock-out is recommended. A total lock-out is recommended when configuration parameters will be constant
for a long time.
Changing default security code and keep new one in a safe place is also strongly recommended.
SERIE KOSMOS
RESET function activated through UP key can be blocked, as well (only
when operating as counter 'Cont').
NOTE:
Totalizer RESET function lock-out is not available and it will
always remain active.
SHIFT key lock-out for MAX/MIN function is configurable in the same
way as previous configurations (only when operating as tachometer
'tACH' or 'rAtE').
When lock-out is enabled (selecting "yES") it is not possible to visualize
maximum or minimum values by pressing SHIFT key, although
instrument internally continues detecting and saving new extreme
values reached by input signal.
www.ditel.es
JR-D / JR20-D
71