Makita DLS714 Manual De Instrucciones página 11

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Blade diameter
Hole (arbor) diameter (country specific)
Max. kerf thickness of the saw blade
Max. miter angle
Max. bevel angle
No load speed
Dimensions (L x W x H)
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Cutting capacities (H x W) with blade 190 mm in diameter
45° (left and right)
1. Max. Cutting capacity when using a wood facing 20 mm thickness
2. Max. Cutting capacity when using a wood facing 15 mm thickness
3. Max. Cutting capacity when using a wood facing 10 mm thickness
Miter angle
0°
57° (right)
655 mm x 430 mm x 445 mm
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
45° (left)
40 mm x 300 mm
45 mm x 265 mm
(NOTE 1)
40 mm x 212 mm
45 mm x 185 mm
(NOTE 2)
–
–
11 ENGLISH
DLS714
190 mm
20 mm or 15.88 mm
2.2 mm
Left 47°, Right 57°
Left 45°, Right 5°
-1
5,700 min
D.C. 36 V
14.4 - 14.7 kg
DC18SH / DC18WC
Bevel angle
0°
52 mm x 300 mm 40 mm x 300 mm
60 mm x 265 mm
(NOTE 1)
52 mm x 212 mm
60 mm x 185 mm
(NOTE 2)
52 mm x 163 mm
60 mm x 145 mm
(NOTE 3)
5° (right)
–
–
–
–
–