DEXIS 14014550 Manual Del Usuario página 23

Installation for Users without USB Software Kit
1. Log into your computer with an Administrator account.
Open your supported Imaging Software and verify that you have the
minimum version installed.
2. Navigate to https://dexis.com/en-us/download-center and download
the latest version of your Imaging acquisition software, according to the
version that you are currently using.
3. Download the latest version of the DEXIS IO Sensor Drivers by
searching for DEXIS Titanium. The file name for the driver is
DEXIS_IO_Sensor_Drivers.exe.
Open your Imaging acquisition software to install your update.
NOTE: You will NOT need to uninstall your previous version of your Imaging
acquisition software in advance.
4. Right click the DEXIS_IO_Sensor_Drivers.exe and select Run as
Administrator.
5. Select the Typical option to install the standard feature set.
6. Reboot your computer to complete the software installation for your
new DEXIS sensor.
NOTE: The calibration of the sensor is initiated when connected to your
imaging software.
Gesture and Dashboard Feature Support
1. Select Custom for Dashboard
and/or Gesture support.
English
Installation
4-3