Tennant T300e Manual Del Operario página 16

English
EN
MACHINE MAINTENANCE
To keep the machine in good working condition, simply
perform the following maintenance procedures.
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine and remove
key.
FOR SAFETY: When servicing machine wear
personal protection equipment as needed. All
repairs must be performed by trained personnel
AFTER DAILY USE
1. Drain and rinse out the recovery tank (Figure 27).
See DRAINING TANKS.
2. Remove the debris tray and empty (Figure 28).
3. Remove and clean the float shut-off screen
(Figure 29).
16
FIG. 27
FIG. 28
FIG. 29
4. Drain and rinse out the solution tank (Figure 30).
5. Disk scrub head - Turn pad over or replace when
worn (Figure 31).
6. Wipe the squeegee blades clean. Inspect blades
for wear and damage (Figure 32). Rotate blade if
worn. See SQUEEGEE BLADE REPLACEMENT.
7. Check the scrub head skirt for wear or damage
(Figure 33). Replace if worn or damaged.
FIG. 30
FIG. 31
FIG. 32
FIG. 33
Tennant T300e (07- 2022)