Hog Slat Grower Select HSES-RA Manual Del Usuario página 17

Evaporative Cooling System
Pump Wiring Instruction
Wire Connection:
Again, make sure that power is disconnected from system prior to servicing.
This Power Unit is supplied prewired for 230 volt operation with the proper rotation direction for correct motor
rotation. If 115 volt operation is required, please see wiring instruction on Motor Data Label for converting to 115
volt operation.
Black wire should be connected to L1(M1) and White wire should connect to L2(M2). Green should be connected
to Ground (See Figure 37)
•
Motor replacement and the associated wiring changes should only be made by qualified and properly
trained individuals.
•
Failure to follow the above warning can cause improper equipment function, premature failure of
equipment or electrical shock, leading to property damage or personal injury.
Hog Slat Inc. Newton Grove, NC USA February 2019
Figure 37
WARNING
ELECTRICAL SHOCK HAZARD!
17