Evaporative Cooling System
! NOTE: FOR PROPER ALIGNMENT, FIT, AND DRAINAGE, THE SLOPE,
SPACING, AND ALIGNMENT OF THE ORIGINAL SYSTEM MUST BE
MAINTAINED THROUGHOUT THE EXTENSION !
Figure 2
ACTUAL HEIGHT OF EVAPORATIVE COOLING PAD MAY VARY
SLIGHTLY, THEREFORE PROPER HEIGHT OF THE SYSTEM
SHOULD BE VERIFIED UTILIZING PADS TO BE INSTALLED
Figure 2 above shows the typical spacing for 2"X4" studs during framing along with typical spacing for the Trough
Support Brackets (If Applicable). Table C provides the vertical dimension from the top of the pad retainer to the
top of the trough bracket for varying pad heights.
Hog Slat Inc. Newton Grove, NC USA February 2019
5