Publicidad
any reason the vacuum cleaner does overheat the thermostat
will automatically turn the vacuum cleaner off. If this happens,
switch the vacuum cleaner off and unplug from electrical
socket. Remove and empty the dirt container and also heck
the vacuum cleaner for blockages. Allow the vacuum cleaner
to cool for approximately 1 hour (if you have cleaned the filters
please wait 24 hours for the filters to fully dry before putting
back into the machine).
•
For best cleaning results, filters should be tapped over a bin
every 4-6 uses to remove dirt and debris and washed every 3
to 6 months (depending on the level of use).
•
If the vacuum cleaner is blocked, switch off and unplug before
removing the blockage.
ASSEMBLING YOUR MACHINE
IMPORTANT: The base of the vacuum cleaner should always
be positioned flat on the floor when starting and in use. The
dirt container should be locked into place before lifting the
vacuum cleaner by the carry handle.
1. Press both buttons at the end of the hose and push hose into the
hose entry point.
2. Insert the hose grip into the telescopic extension tube.
3. Press the button on the telescopic extension tube and adjust to
required length.
4. Insert the other end of the telescopic extension tube into the
Publicidad
