Publicidad
WARNING
Disconnect the cable from the power
outlet before making adjustments, service or maintenance
on the tool.
Cleaning and care
• Keep the tool free of dust. Never use water or
chemical-based cleansing materials. Clean only using a
clean and dry cloth.
• Keep the ventilation slots always clean and free of
obstructions to guarantee the right cooling of the motor.
• Regularly inspect all the assembly screws and
double-check they are properly tightened. If a screw is
loos, tighten immediately.
• Both the armor and the motor are the power tool heart.
Use extreme care not to affect them with oil or water.
• Double-check the power cable regularly to detect any
type of damage. Go to a
Service Center when damaged.
10
ENGLISH
Maintenance
Service
Service to the tool shall only be performed in a
and maintenance performed by non-qualified people may
result dangerous and can cause personal injury and make
the warranty void.
Carbon brush replacement
• Checked periodically the carbon brushes when worn.
Replace only at a
Center.
• After replacing the carbons ask the technician to
Authorized
double-check the new carbon brushes can move freely in
the carbon housing. Ask to have the tool turned on and
keep it running 5 minutes to make even the contact of
carbons and commuter.
• Use only original
brushes, designed specifically with the right strength and
electric resistance for each type of motor. Carbon brushes
with different specifications may damage the motor.
• When replacing carbon brushes both carbons should be
replaced simultaneously.
Authorized Service Center. Service
Authorized Service
spare carbon
Publicidad
