Integrated Descaling Programme - melitta Caffeo CI Manual De Instrucciones

Integrated descaling programme

WARNING
The descaling agent can cause skin
irritations!
▶ Comply with the safety instructions
and the dosing information specifi ed
on the descaling agent packaging.
The integrated descaling programme
(takes about 25 minutes) removes lime
scale residue inside the appliance. The
progress bar on the text display 4 shows
the current progress of the descaling
programme.
The descaling programme should be
performed every 3 months, at the latest,
however, when a corresponding message
appears on the text display 4.
Only use Melitta ANTI CALC.
®
■ Call up the Care sub-menu.
■ Select Descaling in the menu.
■ Select Start in the menu. The descaling
programme will start.
■ When the message "Empty tray and
vessel" appears on the text display 4,
empty the the drip tray and the coffee
grounds container and reinsert them.
■ When the message "Remove water
tank" appears on the text display 4, fl ip
up the lid of the water tank 6 and pull the
water tank 6 up and out of the appliance,
and empty it.
■ If a water fi lter is used, remove it from
the water tank.
■ Add the descaling agent to the water
tank according to the instructions on the
packaging.
■ Reinsert the water tank 6.
■ Place a vessel (min. 0.7 l capacity)
under the outlet 3.
■ Press the rotary switch 10 to confi rm.
Operating Instructions: Melitta
Inserting, changing and removing the water fi lter
■ Connect the tube to the drip tray and to
the outlet (Image D).
■ Press the rotary switch 10 to confi rm.
The descaling programme will continue
(approx. 20 minutes), water fl ows out of
the outlet and in the drip tray inside the
appliance.
■ When the message "Empty tray and
vessel" appears on the text display 4,
empty the vessel under the outlet and
the drip tray. Then reinsert them both.
■ When the message "Refi ll water tank"
appears on the text display 4, fl ip up the
lid of the water tank 6 and pull the water
tank 6 up and out of the appliance.
■ Rinse the water tank 6 thoroughly.
■ Fill the water tank 6 with tap water up to
the max. mark.
■ Reinsert the water tank 6.
■ The descaling programme will continue
(approx. 5 minutes), water fl ows out of
the outlet and in the drip tray inside the
appliance.
■ When the message "Empty tray and
vessel" appears on the text display 4,
empty the vessel under the outlet and
the drip tray. Then reinsert them both.
■ After the descaling programme is
fi nished, the appliance is ready for
operation.
CI | 1834-0618 | 2018-08
® ®
35