Sabiana WM-UH-ECM Instrucciones De Uso página 30

English
» Using the control
Fig. "A"
Fig. "B"
Fig. "C"
°
Fig. "D"
3 . 5
On/Off (Fig. "A"):
• Press the ON/OFF button to activate the con-
trol .
• Press the ON/OFF button again to switch the
control off.
• The word "ON" or "OFF" will appear in the dis-
play.
Set temperature (Fig. "B"):
+
• Press the " " or "
ture will flash.
• Adjust the set temperature using the "
buttons.
Selecting modes (Fig. "C"):
• Press the "M" button to select the desired
operation mode;
+
• Use buttons "
mode:
the cooling mode is set.
the heating mode is set.
the ventilation mode only is set.
Press the "M" button to confirm
Manual fan speed selection (Fig. "D"):
• Press the FAN button to enable the manual
adjustment of the fan speed.
+ -
• Use the " " or "
Fan low speed (1 ÷ 3.5 V)
Fan medium speed (4 ÷ 6 V)
Fan high speed (6.5 ÷ 10 V)
+
With the " " or "
value from the board is increased or decreased
and the display will show the set value.
30
-
" buttons: the set tempera-
-
" or " " to select the operation
" buttons to select:
-
" buttons the output voltage
+ -
" or " "