Sabiana WM-UH-ECM Instrucciones De Uso página 34

English
» Features for service
> 3 sec.
Parameters Table
FUNCTION
P1
View probe T1 value
P2
P3
View probe T3 value
FF1
View window contact status
ALL
View any alarms
Usc1
View voltage value sent to the inverter by the master
DESCRIPTION
/
This menu
control parameters
window contact
With the control set on "OFF", press the "+"
and "-" buttons simultaneously for 3 seconds.
Select the desired parameter to be modified
pressing the "+" or "-" buttons and confirm
using the "M" button.
Once the parameter is selected, the value will
be displayed.
To exit the menu, press the "M" button for more
than 5 seconds.
diS = Probe not connected
diS = Probe not connected
C = Closed
--- = No alarm
AL3 = Faulty T3 probe
AL4 = Wrong Master dip configuration
AL5 = Wrong T-MB dip configuration
AL6 = Faulty RS485 transmission
AL7 = Faulty TTL transmission (T-MB/Slave)
34
allows checking
(probe
status, any
STATUS
/
O = Open
AL1 = Faulty T1 probe
some
value,
alarms).