Publicidad
2
3
10
4
Cables in the FLOOR STAND 5 MU
Note
To assemble the equipment on the FLOOR STAND 5 MU, cover
the foot of the FLOOR STAND 5 MU with a protective felt from
the packing material.
This prevents damage to the foot of the FLOOR STAND 5 MU
Control cable for FLOOR STAND 5 MU
The control cable (page 8, fi g. c) is plugged with the right-an-
gled plug into the socket on the back of the FLOOR STAND 5
MU. Then feed the control cable up through the small opening
in the back (fi g. 2).
RS232, AudioLink, Digital Audio, power cable
You have received these cables with the SOUND PROJECTOR.
Use them to connect the TV set to the SOUND PROJECTOR.
You will fi nd instructions for connecting the equipment in the
respective operating manual.
Lay cables from top to bottom through the FLOOR STAND 5 MU.
Make sure that the plugs of the cables are on the right side.
The power cable serves for connecting the SOUND PROJECTOR
to the power supply.
Publicidad
