Publicidad
18
19
20
b
a
Fixing the SOUND PROJECTOR to the
FLOOR STAND 5 MU
You have mounted the SOUND PROJECTOR on the FLOOR
STAND 5 MU.
You will fi nd instructions for connecting the cables to the
SOUND PROJECTOR in the operating manual.
Our suggestion for fastening the cables is shown in fi g. 18.
Horizontal alignment of the SOUND PROJECTOR
Make an exact horizontal alignment when the TV set has been
mounted on the FLOOR STAND 5 MU.
Lift up the left side of the SOUND PROJECTOR:
Turn the screw fi g. 19, arrow a in the direction of the arrow a2.
Lift up the right side of the SOUND PROJECTOR:
Turn the screw fi g. 19, arrow b in the direction of the arrow b2.
If no horizontal adjustment is necessary, still check both screws
for horizontal alignment.
Turn the two screws in (fi g. 19, in the direction of the arrow) un-
til the adjusting levers can no longer rattle. Adjusting levers not
touching the SOUND PROJECTOR cause unpleasant background
noise later when operating the SOUND PROJECTOR.
Publicidad
