MSA Gallet F1XF Manual Del Operador página 8

The Declaration of Conformity can be found under the following link: https://MSAsafety.com/DoC.
75
70
65
60
55
50
45
40
35
1600 1800 2000
The protection against radiating heat ensured by the face shields varies with the temperature of the heat source,
see figure above. It is recommended to only use the face shield when the face shield can reduce the heat exposure
to the wearer's eyes to less than 100W/m2.
WARNING!
When fitted with another item of personal protective equipment or with an accessory, (other than as supplied by the
helmet manufacturer for use with this helmet) a helmet marked as complying with EN 443 might no longer satisfy all
clauses of the standard. Refer to information supplied by the helmet manufacturer.
Failure to follow this warning can result in serious personal injury or death.
3 Adjusting the Helmet
3.1 Before Donning
3.2 Donning
The following adjustments have to be carried out when the helmet is donned.
GB
Radiant heat protection
2200 2400 2450 2600
Source Temperature (K)
1. Choose helmet size M or L (see Technical Data) according to your head
size.
2. Adjust front headband by sliding it up or down.
3. Position front headband inside the helmet to avoid contact between
headband and mask.
4. Adjust rear headband by rotating to optimise fit on back of the head.
5. Adjust wearing height with the Velcro fasteners on the two rear
suspension straps.
GA1086A
GA1086B
2800 3000 3200
3 Adjusting the Helmet
8