Publicidad
Idiomas disponibles
Idiomas disponibles
1. Important information
Installation time is approx. 1 hour, but this may vary depending on the condition of the car and the
equipment in it.
BMW cannot accept any liability for damage caused by ignoring the work and the safety instructions set
out in this document. In addition, if the accessory part is not installed and handled properly as set out in these
installation instructions, no claims under the guarantee will be accepted by BMW AG.
Installation instructions
The accessory side skirt should be installed by two people.The installation work is shown for the side skirt on the
right-hand side of the car.The work for the left-hand side must be completed in the same way.
Safety instructions
It is essential to ensure that any mechanical work or painting does not destroy the model plate or embossed
information in the side skirt or render it illegible.The model plate is embossed legibly at the rear on the inside of
the side skirt.
Painting instructions
The rear wing is supplied ready-primed and must undergo the appropriate pre-treatment.
Refer to the BMW painting instructions for all painting work.
Procedures
The side skirt is made of PUR-R-RIM.
Paint it using BMW acrylic paint +30% softface additive
Maximum temperature for stoving 40°C.
Tools and equipment required
Straight slot screwdriver
Angle cutter
Pointed pliers
Folding section
EN/1-3
Publicidad
