Advice. After gluing the sill covers off and their re-gluing, their suffi-
EN
cient cohesion can be no longer guaranteed. Therefore make sure you
position them correctly yet before the gluing itself.
Sill cover maintenance instructions (Fig. 9)
Once the door sill covers have been bonded, the vehicle must be stored in a protected
room for six hours (temperature between 18 and 30 °C).
Always provide the customer with the following information when handing
over the vehicle after having fitted the components.
12 hours following the gluing of the door sill covers do not drive the car in a car wash.
Wash the tdoor sill covers with a mild solution of common detergents. In no case use
agents containing abrasive solvents. Avoid cleaning the door sill covers with a dirty clout
or a wire nail.
10