LUTEC WLA-54L Manual Del Usuario página 35

5. Wireless Network Configuration in
Station Mode
WLAN USB Adapter uses its own management software. All functions controlled by
users are provided by this application. When you insert the WLAN USB Adapter into
the USB port of your PC, a new icon should appear in the Windows System Tray
automatically.
If the icon is in red, it means that WLAN USB Adapter configuration is invalid or
incomplete. Double click on that icon and the configuration window will pop up as
shown below. It shows the SSID of available network. Once a network is chosen, the
signal strength and link quality are displayed.
The Link Quality and Signal Strength bar chart is only active when the node is in
Infrastructure Mode. The bar graph displays the quality and strength of the link
between the node and its Access Point. Link Quality is a measurement of receiving
and transmitting performances over the radio.
Tx/Rx Frame displays the instantaneous wireless Transmit and Receive counts.
The Configuration Tool contains
several fields where operating
parameters of the driver can be
viewed or changed. Changes to
any of the parameters in this
panel can be applied to the driver
without a need to restart the
computer.
Current Network Information
displays the current network
configuration. If you want to
change network configuration, click "More Setting".
Seite 35/145