6. Wireless Network Configuration in
AP mode
WLAN USB Adapter uses its own management software. All functions controlled by
users are provided by this application. When you insert the WLAN USB Adapter into
the USB port of your PC, a new icon should appear in the Windows System Tray
automatically.
If the icon is in red, it means that WLAN USB Adapter configuration is invalid or
incomplete. Double click on that icon and the configuration window will pop up as
shown below.
If you need to set your WLAN USB Adapter as an Access Point, you can change the
configuration mode to "Access Point" on the top right corner instead of "Station"
Mode. It shows the Connection Station List that connect to your USB Adapter. While
a computer connects to your Dongle, its MAC Address will be shown in the table.
Tx/Rx Frame displays the instantaneous wireless Transmit and Receive counts.
Click "More setting" for changing your Access Point configuration.
Seite 42/145