GB
1.
Overview (See images 1 - 4)
Item
A
B
C
D
E
F
G
H
I
J
2.
FireFox
2.1
Correct use
The blind rivet nut tool is designed exclusively for setting blind rivet nuts and blind rivet nut
studs as described in the operating instructions. Please comply with all safety instructions!
2.2
Safety instructions
•
The blind rivet nut setting tool should only be used for setting blind rivet nuts and blind rivet nut studs.
•
Improper use when winding down and setting nuts poses a risk of crushing your fingers!
•
Do not overload the blind rivet nut setting tool; work within the prescribed work capacity.
•
Do not exceed the permitted operating pressure.
•
Do not rivet outside of riveting holes.
•
Check connecting lines for compressed air at regular intervals for force fit and tightness.
•
Disconnect the device from the compressed air network prior to carrying out any maintenance work
to the blind rivet nut setting tool, changing threaded mandrels or when not in use.
•
When working with the blind rivet nut setting tool, always wear protective goggles. Personal protec-
tion like clothes, gloves, safety helmet, non-slip shoes, ear protection and anti-fall protection are
highly recommended.
•
When depositing the blind rivet nut setting tool, make sure that it cannot fall.
•
Repair work must be carried out by skilled personnel. Use genuine parts for repair at all times.
In case of doubt, always send the complete blind rivet nut setting tool back to the supplier or to
GESIPA
.
®
16
Designation
Locknut
Nosepiece
Threaded mandrel
Wind down button
Allen key
Adjustable screw with colour
scale
Display window
Slide
Oil refill screw
Seal
2 blind rivet nut setting tool
®
Abb.
1;3;4
1;3;4
1;3;4
1
1
2
2
3
1
1