Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Connection of drainage hoses
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm or drop it into the sink, making
sure that it is not kinked or twisted. The height of the drain hose must be less than 1000 mm. The free end
of the hose must not be submerged in water to avoid overflow.
Back of dishwasher
Note: Securely fix the drain hose in position A or position B.
Draining excess water from hoses
If the sink is at a height of 1000 mm above the floor, excess water from the hoses cannot be drained
directly into the sink. It will be necessary to drain the excess water from the hoses into a suitable
container or bucket that is kept outside and at a lower height than the sink.
Water outlet
Connect the water drain hose. The drain hose must be correctly installed to prevent water leakage. Make
sure that the water drain hose is not kinked or crushed.
Extension hose
If you need an extension of the drain hose, make sure to use a similar drain hose. It should not exceed 4
meters, otherwise the dishwashing efficiency of the dishwasher may be reduced.
Siphon connection
The drain connection must be at a height of less than 1000 mm (maximum) from the bottom of the tank.
The water drain hose must always be fixed.
Drain hose
Water Inlet
Drain Pipe
Mains Cable
A
B
45
English
Counter
infiniton.es
Publicidad
