Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Location
Position the product in the desired location. The back of the product should rest against the back wall
and the sides along the adjacent furniture or walls. The dishwasher is equipped with a water supply hose
and a drain hose which can be positioned to the right or left for easy installation.
Leveling
Once the product has been positioned for levelling, the height of the dishwasher can be altered by
adjusting the height of the legs.
Note: Apply to freestanding dishwashers only.
Free standing
Fitting between furniture
The height of the dishwasher, 845 mm, has been designed to allow
the unit to be installed between existing units of the same height
in any fitted kitchen. The legs can be The legs can be adjusted to
achieve the correct height.
The laminated top of the machine does not require any special
care, as it is resistant to special care as it is resistant to heat,
scratches and stains.
Under-worktop mounting
When installed under a worktop, in most modern fitted kitchens
there is only When installed under a worktop, in most modern fitted
kitchens, there is only a worktop under which the cabinets and
appliances are installed. In this case, remove the worktop from the
dishwasher by unscrewing the screws under the rear edge of the
under the rear edge of the worktop.
WARNING! After removing the upper part of the product, the
screws MUST be screwed back in under the rear edge of the
upper part (b).
Note: The height shall be reduced to 815 mm, as required by the
International Regulations (ISO) and the dishwasher shall fit snugly
under the cooker.
46
English
a
a
b
b
infiniton.es
Publicidad
