MSA ALTAIR 5X Manual De Uso página 28

4 Operation
• The ▼ button go to next page
• The ▲ button to go previous page
• The ■ button to enter setup.
Setting Sensor Options
1. Press the ■ button to enter setup.
NOTE: Following screen displays:
Figure 11 Sensor Options Setup
2. Press the ▼ button to select sensor, press the ■ button to make changes.
NOTE: The sensor information is displayed and the sensor can be enabled or disabled.
NOTE: Other operations such as changing the gas type (Methane, Butane, Propane etc. for the combustible sensor) and
units (ppm to mg/m3) are only possible using the MSA Link software.
3. Change status by pressing the ▼ or ▲ button.
4. Press the ■ button to confirm and advance to next screen (next sensor).
5. Perform the sequence for all other sensors.
NOTE: After setting up the last sensor the device goes to the next Setup Page.
Language Setup
This option is for setting the language of the device.
1. Press the ■ button to enter setup.
2. Change language by pressing the ▼ or ▲ button.
3. Confirm with the ■ button.
NOTE: The device goes to the next Setup Page.
Time and Date Setup
This option is for setting the device time and date. The device first prompts to set the time and then it prompts for the date.
NOTE: The time can be set up for either regular AM/PM or military time (through MSA Link software). AM/PM time is the
default setting.
1. Press the ■ button to enter setup.
2. Change hours by pressing the▼ or ▲ button.
3. Confirm with the ■ button.
4. Change minutes by pressing the ▼ or ▲ button.
5. Confirm with the ■ button.
NOTE: The device goes to the Set Date Page.
6. Change month, date and year by pressing the ▼ or ▲ button and confirming with the ■ button.
NOTE: The device goes to the next Setup Page.
7. Confirm with the ■ button.
28 ALTAIR 5X / ALTAIR 5X IR US