Publicidad
Idiomas disponibles
Idiomas disponibles
GUIDE FOR TROUBLESHOOTING
PROBLEM
ENCOUNTERED
The machine does not
switch on.
The capsule insertion
compartment opening lever
does not reach closure
position.
The pump is highly noisy.
The machine does not brew
coffee.
Coffee is not hot enough.
The "operation in
background" screen
remains steady.
Per i guasti non contemplati dalla suddetta tabella o nel caso in cui i rimedi suggeriti non li risolvano,
rivolgersi al servizio clienti.
Per le caratteristiche tecniche fare riferimento alla targhetta dati presente sul fondo della macchina.
Type of product to be used:
Dimensions (L x H x D):
Weight (approximate):
Water tank capacity:
Used capsule drawer capacity:
Discharge basin capacity:
Insulation class:
35
POSSIBLE
CAUSE
• Machine not connected to the
mains.
• ON/OFF switch in OFF
position.
• Used capsules drawer full.
• Capsule inserted in a wrong
way.
• Water missing inside the tank.
• Capsule not inserted.
• The inserted capsule is not a
Essse Sistema Espresso capsule.
• Operating temperature not
reached.
• Capsule compartment cursor
open.
• Water missing inside the tank.
• The cups are cold.
• A failure occurred.
TECHNICAL SPECIFICATIONS
Essse Caffè Sistema Espresso Capsules
Ejection:
Automatic ejection of the capsule
233 mm x 299 mm x 375 mm
5,4 Kg
1,4 lt.
20 capsules
0.35 lt
Class I
Power:
See technical data plate on the bottom of the machine
Voltage:
See technical data plate on the bottom of the machine
Frequency:
See technical data plate on the bottom of the machine
Espresso and hot drink machine which uses single-dose capsules
POSSIBLE
SOLUTION
• Check for correct insertion of the
socket.
• Set the ON/OFF switch to ON
position.
• Empty the used capsules drawer.
• Open the capsule insertion
compartment cursor and insert the
capsule correctly.
• Top up with fresh drinkable water
and repeat loading of the water
circuit.
• Insert the Essse Sistema Espresso
capsule
• Wait for the suitable temperature
to be reached.
• Close the capsule insertion cursor.
• Top up with fresh drinkable water
and repeat loading of the water
circuit.
• Preheat the cups by brewing hot
water or use plastic coffee cups.
• Contact the assistance centre.
EN
Publicidad
