Descargar Imprimir esta página

Reese M5 RAM LEGS 30917 Instrucciones Del Producto página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

FOR INSTALLATION WITH M5
HEAD AND CENTER SECTION
3.
Determine which center section mounting holes to use to ensure a minimum of 6" clearance
between the truck bed rail and the bottom of the trailer. ( For more detail, please refer to the
GUIDELINES FOR MATCHING HITCH, TRUCK, AND TRAILER section located in the head and center
section instruction sheet.) Legs should be attached at same height on both sides of unit. This unit
has 4" of vertical adjustment.
4.
Using the (4) M16x2x40 mm Hex Head Bolts and conical washers, attach the legs to the center
section structure, threading the bolts from the inside of the center section into the threaded portion
of the legs. Finger tighten bolts initially until final adjustments are made.
©
2019 Horizon Global America Inc.
Product Instructions
M5 RAM LEGS
ASSEMBLY AND INSTALLATION
Page 3 of 24
06/21/2022
30917N
02/25/2019
Part Number:
30917
Rev. B
Rev. A

Publicidad

loading