Publicidad
Idiomas disponibles
Idiomas disponibles
FOR INSTALLATION WITH M5
HEAD AND CENTER SECTION
In order to maintain performance over the life of the product:
1.
Before any trip, verify that lynch pins, foot bracket and castle nut are undamaged and securely locked. Additionally ensure
that the lynch pins are also securely locked in place, with little to no vertical play. The image below shows the proper
orientation of the lynch pin in relation to the foot.
2.
Every 1,000 miles, check the M16 hex bolts that connect center section to legs to insure that they are still torqued to 220 ft-
lb of torque.
3.
For general maintenance of the entire 5
sheet.
©
2019 Horizon Global America Inc.
Product Instructions
MAINTENANCE
th
wheel hitch assembly, please refer to the M5 head and center section instruction
Lynch
Pin
M5 RAM LEGS
Lynch pin shown in
properly closed position.
DO NOT reverse loop to
other side of pin!
Page 7 of 24
Foot Bracket
Lynch
Pin
06/21/2022
30917N
02/25/2019
Part Number:
30917
Rev. B
Rev. A
Publicidad
