Grundfos MAGNA3 Serie Instrucciones De Instalatión Y Funcionamento página 22

6. Settings
6.1 Overview of settings
All settings can be made on the pump control panel or with the Grundfos GO Remote.
Menu
Setpoint
Operating mode
Control mode
FLOW
LIMIT
Automatic Night Setback
Relay outputs
Setpoint influence
Bus communication
General settings
22
Submenu
• Normal
• Stop
• Min.
• Max.
• AUTO
ADAPT
• FLOW
ADAPT
• Prop. press.
• Const. press.
• Const. temp.
• Constant curve
• Set FLOWLIMIT
• Not active
• Active
• Relay output 1
• Relay output 2
• External setpoint function
• Temperature influence
• Pump number
• Language
• Set date and time
• Units
• Enable/disable settings
• Delete history
• Define Home display
• Display brightness
• Return to factory settings
• Run start-up guide
Further information
See section 12.1 Setpoint.
See section 12.2 Operating mode.
See section 12.3 Control mode.
See section 12.3.1 AUTOADAPT.
See section 12.3.2 FLOWADAPT.
See section 12.3.3 Proportional pressure.
See section 12.3.4 Constant pressure.
See section 12.3.5 Constant temperature.
See section 12.3.6 Constant curve.
See section 12.4 FLOWLIMIT.
See section 12.5 Automatic Night Setback.
See section 12.6 Relay outputs.
See section 12.7 Setpoint influence.
See section 12.7.1 External setpoint function.
See section 12.7.2 Temperature influence.
See section 12.8 Bus communication.
See section 12.8.1 Pump number.
See section 12.9 General settings.
See section 12.9.1 Language.
See section 12.9.2 Set date and time.
See section 12.9.3 Units.
See section 12.9.4 Enable/disable settings.
See section 12.9.5 Delete history.
See section 12.9.6 Define Home display.
See section 12.9.7 Display brightness.
See section 12.9.8 Return to factory settings.
See section 12.9.9 Run start-up guide.