TOPDON ArtiDiag500 S Manual Del Usuario página 11

1.1 Smart Diagnosis
Connect the unit to the DLC's port via OBDII cable. Turn the
ignition key on. Tap "Diagnosis" in the main interface, and then tap
"AutoSearch". The system will automatically start scanning the
vehicle's VIN data.
*Note: Follow the prompts to proceed if the communication failure
1.2 Manual Diagnosis
If the tool cannot obtain or analyze the VIN information, you can
also perform Manual Diagnosis. In this mode, you need to execute
the menu-driven command and follow the on-screen instruction to
proceed.
Refer to the flowchart illustrated as below to run the manual system
diagnostics.
*Note:
• Before diagnosing, please make sure the corresponding vehicle
manufacturer software has been installed in the scanner.
• The diagnostic menu may vary by the vehicle's make, model and year.
occurs.
11