Publicidad
Idiomas disponibles
Idiomas disponibles
c) Keep the charger away from dirt
and moisture.
d) Always check the charger, cable
and plug before use. Stop using
the charger if you discover any
damage. Do not open the charg-
er yourself, and have it repaired
only by a qualifi ed specialist
using only original replacement
parts. Damaged chargers, ca-
bles and plugs increase the risk
of electric shock.
e) Do not operate the charger on
an easily ignited surface (e.g.
paper, textiles, etc.) or in a
fl ammable environment. There is
a risk of fi re due to the charger
heating up during operation.
f) Rechargeable batteries are to
be removed from the appliance
before being charged.
7) SERVICE
a) Have your power tool serviced
by a qualifi ed repair person
using only identical replacement
parts. This will ensure that the
safety of the power tool is main-
tained.
b) Never service damaged battery
packs. Service of battery packs
should only be performed by
the manufacturer or authorised
service providers.
GLUE GUN SAFETY
WARNINGS
WARNING: This tool must
be placed on its stand
when not in use.
1. This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory and
mental capabilities or lack of ex-
6
perience and knowledge if they
have been given supervision or
instruction concerning use of
the appliance in a safe way and
understand the hazards involved.
Children shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
2. Never insert objects other than
Ø12mm Rapid glue sticks into
the machine.
3. Never remove a glue stick that
has already been inserted.
4. It is normal for this tool to beco-
me quite warm during use. This
is normal and does not indicate
a problem.
5. Hot Surfaces: the nozzle of
the appliance and the glue can
reach a temperature of approx.
190°C. Do not touch the heated
nozzle or the hot adhesive. Avoid
any contact with the skin. If you
burn yourself, put the burn in
cold water immediately. Never
try to remove a large quantity of
glue without medical help.
6. Some materials are heat-sen-
sitive and can be damaged by
the hot nozzle or even the hot
glue. Whenever possible, test a
piece of scrap material or a hid-
den portion of the object being
repaired.
7. When you have fi nished using
the machine, turn the switch off
and wait until it has cooled. Ne-
ver immerse glue gun in water
or other liquids to speed cooling
process. Allow it to air cool only.
The glue gun should be stored
in a closed dry and secure place
(tool box, drawer, cupboard,
Publicidad
