Stalgast 801350 Instrucciones De Uso página 29

Model
Dimensions
Power Supply
Frequency
Maximum Energy Consumption
Supply water pressure
Supply water temperature
Hardness of water in the water
network
Water consumption
Boiler capacity
Tank capacity
Standard cycle duration
Noise level
Protection
Net weight
Power cord type H07RN-F
Wash water temperature
Rinse water temperature
The dishwasher has an automatic sanitization function (it is an integral part of the washing cycle).
4. INSTALLATION
4.1. Positioning of the device
The device should be moved to the place of installation, unpacked and the package contents should be
checked. In the even any damage to the device or any of its elements is detected, this must be immediately
notified to the transport company. The packaging material must be kept away from children and pets, as
they may cause an accident. All materials used for the packaging of the device are environment-friendly and
can be safely stored in an appropriate place. Items intended for recycling are marked as follows:
• PE – polyethylene: external packaging, manual cover, protective packaging,
• PP – polypropylene: handles,
• PS – polystyrene foam: edge protection, package cover.
• Wooden and cardboard elements of the device should be left in places intended for this purpose in
accordance with the applicable laws.
It is prohibited to store the elements of the device and the device itself directly in the natural environment.
The device is made of stainless steel and the elements which can be easily removed. The plastic components
of the device are marked with an appropriate symbol.
All connections to the device must meet the standards applicable in the place of installation. The
manufacturer is not liable for any injuries or damage to the product resulting from failure to comply with
the standards applicable in the place of installation. Before installing the device, it is necessary to make sure
that the moisture-sensitive elements are properly secured against getting wet, e.g. during the cleaning of
the device. The device should be placed in the desired location and then the protective packaging should
be removed. The device should be leveled using a spirit level and four adjustable legs in order to ensure its
stability. Any other way of leveling the device should be approved by the manufacturer.
4.2. Connection to the power supply source
The device's connection to the electrical network may only be executed by the employees of the technical
service or a person with appropriate licenses in accordance with the applicable laws. The electrical parame-
ters of the device were included in the table in point 3. It is prohibited to execute one electrical protection
for two devices. It is necessary to install an external safety switch and a residual-current circuit breaker. Both
switches must be installed in a quickly and easily accessible place in such a way, that they guarantee the
801350V03, 801400V03,
801351V03, 801401V03,
801352V03 801402V03
415x530x680 465x565x720
230 V/l
2730 W
2,4 l/cycle
2,5 l
10 l 14 l
120/180 sec.
29 kg 32 kg
2
3x1.5mm with plug
- 29 -
801505V03, 801506V03,
801507V03, 801515V03,
801516V03, 801517V03
565x680x835
230V/l
50 Hz
3400 W 4900 W
200-400 kPa
max 55°C
5-6 dH
2,5 l/cycle
5,5 l
26 l
120/180 sec.
64 dB(A)
IPX1
56 kg
2
3x2.5mm
60-65°C (140-149°F)
82-90°C (181-194°F)
801555V03,
801556V03,
801565V03,
801566V03
400V/3+N+PE
6650 W
2,5 l/cycle
6,5 l
26 l
90/120/180
sec.
58 kg
2
5x1.5mm