Stalgast 801350 Instrucciones De Uso página 35

SET
Press again. The displays will show the following data:
o
perature (40-70 C).
The
SERVICE SETTINGS (it is recommended that they are not changed)
SET
Press
again. The displays will show the following data:
o
temperature (50-90 C).
The
SET
Press again. The displays will show the following data:
after the activation of the pressure switch (0-40 sec.) determining the water level.
The
SET
Press
again. The displays will show the following data :
sec.).
The
During the setting of the above parameters the display screen is blinking, and the values of the parameters
can be changed using the arrows.
Function
Name
P1
P2
P3
P4 time for water release after the activation of the pressure switch
P5
b. programming of cycle duration
Press Display 1 will indicate:
arrows can be used to adjust the temperature on display 2.
arrows can be used to adjust the temperature on display 2.
arrows can be used to adjust the time of water release on display 2.
arrows can be used to adjust the sanitization time on display 2.
RECOMMENDED SETTINGS
Function description
sanitization (rinsing) temperature
washing temperature
minimal sanitization temperature
sanitization (rinsing) time
– the set time is 90 seconds
- 35 -
- washing water tem-
- minimal sanitization
time for water release
- sanitization time (8-15
Recommended value
90ºC
60ºC
82ºC
0 seconds
15 seconds