Charge the battery
Charging method:
Step 1:First connect the charger to the power outlet and then to the
charging port of the scooter.
Step 2:A red signal light will come on indicating that the battery is
charging (make sure the connection is not damp or wet).
Step 3:once the battery is charged, a green signal light will turn on,
moving to a "Stand By" position and this state will not cause
any damage to the battery and it will not be necessary to charge
it.
Step 4:When you unplug the charger from the charging port, make
sure to put on the dust-proof cap.
Tips for charging the battery:
When using the scooter for the first time, make sure to charge the
battery for at least five (5) hours. Charge times could range from five
(5) to ten (10) hours. The charging process is automatic and if possible
it is recommended to charge the batteries daily.
To maximize battery life, make sure to fully charge the battery at least
once a month or two days after using the scooter. Be sure to charge
the battery at room temperature.
Failure to observe the established charge cycles could damage the
battery.
Be sure to use original Batteries, chargers and cables supplied by the
manufacturer. Failure to use the listed accessories will risk permanent
battery damage and will also void the warranty. Use a suitable power
outlet.
Be sure to charge in a ventilated environment. Under no
circumstances should charging components be allowed to come into
contact with water as they could generate current discharges. NEVER
touch the charging components with damp/wet hands. In case of
17