TEMP
Thermostat setting: You can set the desired temperature between 15℃-35℃ using +/- buttons on the remote
•
control.
When the thermostat is set and the room temperature is 1°C higher than the set temperature, the heating
•
will be turned off automatically, when the temperature is 1°C lower, the heating will be turned on
automatically.
Operation Heat Wave Style 1500 LCD
Please turn on the power switch to start up the device.
MODE
Choose between the 3 power levels
• High: The "H" mark lights up on the control panel and the power is 1800 W.
• Medium: The "M" mark lights up on the control panel and the power is 1200 W.
• Low: The "L" mark lights up on the control panel and the power is 600 W.
TIMER
• This device has a 24-hour timer.
• Use "+" and "-" buttons on the remote control to set the timer by hour.
• Pressing "MODE" will display the remaining time of the timer.
• The heater will automatically turn off when the time is up.
TEMPERATURE
Thermostat setting: You can set the desired temperature between 15℃-35℃ using +/- buttons on the remote
•
control.
When the thermostat is set and the room temperature is 1°C higher than the set temperature, the heating will
•
be turned off automatically, when the temperature is 1°C lower, the heating will be turned on automatically.
Installation and first use of Heat Wave Style 2000 LCD
Please remove the device from the packaging and remove the protective foil.
•
Please mount the feet with the help of the enclosed screws.
•
Operation Heat Wave Style 2000 LCD
Heating level
1
Temperature
2
Timer
3
Control indicator
4