Lavor Darwin Manual Del Usuario página 20

EN
Translation of the original instructions
GENERAL INFORMATION
INTENDED USE
· The appliance can be used for washing surfaces out-
doors, whenever pressurised water is required to re-
move dirt.
· With special optional accessories, it can be used for
foaming and sandingblasting, and for washing with
a rotary brush for application to the gun.
· The appliance is intended for professional use.
TECHNICAL DATA
(see technical data plate)
1 Power supply
2 Power Consumption
3 Protection class IP (IEC 60259)
4 Working pressure
5 Maximum pressure
6 Max Water Supply Temperature
7 Maximum supply water pressure
8 Nominal flow rate
9 Maximum flow rate
10 Fuel (Burner)
11 Serial number
12 Temp. Max. (Performance data)
13 Burner capacity
14 Sound power level (Guaranteed)
15 Weight
m/s 2,2
Arm vibrations.
2
k 15%
(Values according to standard: EN
60335-2-79)
N 43
Recoil force of gun at operating pres-
sure (max) .
ℓ 3,5 Detergent tank capacity
ℓ 15
Gas oil Fuel tank capacity
The appliance shall be connected to the electrical net-
work providing that the impedence :
Zmax = 0,0924 Ohm
The highest allowed net impedance at the electrical
connection point , is not to be exceeded. In case
of confusion regarding the power impedance
present on your connection, please contact your
utilities provider.
20
SYMBOLS
WARNING: It is important to be careful
of the following items.
IMPORTANT NOTE
Use the following personal protection
equipment (PPE): Wear protective ear
muffs.
SAFETY
• WARNING:
Read and keep in mind that indicated in the
INSTRUCTION MANUAL - SAFETY WARNINGS.
SAFETY DEVICE
• WARNING: the gun is fitted with a safety catch.
Whenever use of the machine is interrupted it is im-
portant to operate the safety catch to prevent acci-
dental activation of the jet.
- Safety features: gun equipped with safety locking
device, appliance equipped with (Class I) overload
cutout, pump equipped with by-pass valve or shut-
down device.
- The safety button on the gun is not there to lock the
lever during operation, but to prevent its accidental
operation.
• WARNING: The appliance is equipped with a mo-
tor protection device: in case of device intervention,
wait some minutes or, in alternative, disconnect
and re-connect the product to the electric system.
In case this problem repeats again or if the product
does not start again, take the product to the nearest
After Sales Service Point
STABILITY
• WARNING: The machine must be always kept on
horizontal bases, in a safe and stable way.