Descargar Imprimir esta página

Vaillant sensoCOMFORT VRC 720/3 Manual De Uso E Instalación página 59

Publicidad

Idiomas disponibles

Idiomas disponibles

1
Safety
1.1
Intended use
In the event of inappropriate or improper use,
damage to the product and other property
may arise.
The product is intended for using an eBUS
interface to control a heating installation with
heat generators from the same manufacturer.
The system control controls based on the
installed system:
– Heating
– Cooling
– Ventilation
– Domestic hot water generation
– Circulation
Intended use includes the following:
– observance of accompanying operating,
installation and maintenance instructions
for the product and any other system com-
ponents
– installing and setting up the product in ac-
cordance with the product and system ap-
proval
– compliance with all inspection and main-
tenance conditions listed in the instruc-
tions.
Intended use also covers installation in ac-
cordance with the IP code.
This product can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabil-
ities or lack of experience and knowledge if
they have been given supervision or instruc-
tion concerning use of the product in a safe
way and understand the hazards involved.
Children must not play with the product.
Cleaning and user maintenance work must
not be carried out by children unless they are
supervised.
Any other use that is not specified in these
instructions, or use beyond that specified in
this document, shall be considered improper
use. Any direct commercial or industrial use
is also deemed to be improper.
Caution.
Improper use of any kind is prohibited.
0020287900_03 Operating and installation instructions
1.2
General safety information
1.2.1 Qualification
The following work must only be carried out
by competent persons who are sufficiently
qualified to do so:
– Set-up
– Dismantling
– Installation
– Start-up
– Decommissioning
Work and functions that must only be car-
ried out or set by the competent person are
marked by the
symbol.
▶ Proceed in accordance with current tech-
nology.
1.2.2 Danger caused by improper
operation
Improper operation may present a danger to
you and others, and cause material damage.
▶ Carefully read the enclosed instructions
and all other applicable documents, par-
ticularly the "Safety" section and the warn-
ings.
▶ As the end user, you should only carry out
those activities for which these instruc-
tions provide instructions and that are not
marked with the
1.3
-- Safety/regulations
1.3.1 Risk of material damage caused by
frost
▶ Do not install the product in rooms prone
to frost.
1.3.2 Regulations (directives, laws,
standards)
▶ Observe the national regulations, stand-
ards, directives, ordinances and laws.
symbol.
59

Publicidad

loading